UD S-Fiberglass Fabric

Anjie unidirectional S-fiberglass fabric is made from S-fiberglass filament with high tensile strength and modulus. Tensile strength of S-Glass epoxy composite can reach 2358MPa(342KSi).Besides, S-Glass fiber has outstanding anti-corrosion and anti-aging capability. Anjie SJ450 can be compatible with epoxy, vinyl and most resin on the current market. After forming fiber-resin matrix( laminate),it shows incredible mechanical performance and reinforcing effect on structures. Anjie SJ450 can satisfy your project requirements strictly in accordance with ASTM test standard.
The basic steps of project operation as below:
concrete surface preparation
crack repair, leak stop, get rid of the aged, loose concrete part
brush primer (0.2-0.4kg/m2)
base surface preparation( putty 1.0-1.5kg/m2)
brush epoxy resin on the surface(0.4-0.5kg/m2)
stick the basalt fiber fabric onto structure
saturate the fabric by brushing epoxy resin along the fabric, ensure that there is no bubble existing in the composite matrix( very crucial) 0.1-0.2kg/m2
if more following basalt fiber fabric layer, brush 4-6times each layer
FRP wrap operation is completed, however, keep the structure from any impact during the following 24hrs